Day: $90
Half Day: $70
24 hours: $115
Paddle Float ( or else known as Kelly Float) that is petrol powered and has adjustable blades. Use for that nice smooth finish on concrete pads. Also comes with a trailer designed specifically to lift the paddle float and swing on or off the pad - remove the need for that extra person at the end of the job
Day: $90
Half Day: $65
24 hours: $105
The ML 13x is a semi-automatic Dual Slope Laser. Fast and Easy Setup – Fully automatic self-leveling allows the operator to setup with just the push of one button. No level bubbles or screws to adjust! Large ±9% (±5 degrees) self-leveling range makes this possible! During work, the automatic self-leveling keeps the beam horizontal, even as the laser is exposed to knocks and vibration. The large LCD display shows all setting and the battery condition. Rugged design – The ML 13x is built to be strong and robust, with the rotor head sealed in a glass housing, making the laser 100% watertight and dust-proof. 600 RPM makes the ML 13x perfect for machine control applications as well as use with normal handheld detectors. The ML 13x is supplied in a transport case with batteries, fast charger and Hand Detector HS 10. Staff and Stand is also included.
Day: $30
Half Day: $25
24 hours: $38
For finishing concrete after screeding, these floats are the thing to use. By turning the handle you can tilt the float to suit whether it is going forward or backwards. The handle comes with up to 3 length extensions, each extension is 6 feet (1.83 metres).
Day: $100
Half Day: $80
24 hours: $130
A medium concrete breaker run by electricity. These machines break out driveways, chimneys and other concrete areas.
Day: $70
Half Day: $50
24 hours: $90
This electric combihammer has maximum working comfort thanks to innovative, perfectly balanced design with ergonomic D-grip and extremely wide range of applications thanks to rapidly interchangeable chucks: TE-C Click chuck (SDS-plus), 3-jaw key chuck and keyless quick-release chuck. Use to hammer drill into concrete, masonry and natural stone (recommended diameter range: 14 to 24 mm); light chiseling work on concrete and masonry; socket cutting using percussion core bits up to 90 mm dia.; drilling with high torque in wood and metal
Day: $110
Half Day: $95
24 hours: $140
This large electric concrete breakers is suited to breaking thicker concrete. It is Ideal for breaking out driveway sections, concrete steps and pathways. It comes with a tool cart for easy transport around the site and a pick, chisel or spade bits, at no extra cost.
Day: $90
Half Day: $70
24 hours: $120
You can't go past the standard concrete mixer. This is towable but it is advisable to travel at speeds of no more than 50 km/phr. It would be preferable to use a trailer. Great for those small concrete jobs around the house and workplace - just add concrete pre-mix, concrete, water and let it mix.
Day: $105
Half Day: $85
24 hours: $120
You can't go past the standard concrete mixer. This is towable but it is advisable to travel at speeds of no more than 50 km/phr. It would be preferable to use a trailer. Great for those small concrete jobs around the house and workplace - just add concrete pre-mix, concrete, water and let it mix.
Day: $110
Half Day: $95
24 hours: $150
This concrete cutter also ideal for heavier cutting of concrete and stone in alterations, renovations and new construction. It is perfect for cutting smaller holes and adjusting window and door openings, as well as for pipe, asphalt and metal cutting. It's also ideal for cutting of curbstones and pavers in landscaping. It is equipped with an X-Torq®engine, which reduces emissions up to 75 % and lowers fuel consumption by 20 % and has a new ergonomic rear handle with hand-friendly controls and is designed to rest well against the body. It comes with a trolley to get those perfectly straight cuts.
Day: $100
Half Day: $80
24 hours: $120
These angle grinders are fitted with diamond cup discs that are useful to grind off things that are a bit stickier or not. They have a guard fitted that a vacuum cleaner can be fitted to for removing dust.
Used for tidy up work on concrete edges or grinding corners off concrete.
Paddle Float that is petrol powered and has adjustable blades. Use for that nice smooth finish on concrete pads. Also comes with a trailer designed specifically to lift the paddle float and swing on or off the pad - remove the need for that extra person at the end of the job
The ML 13x is a semi-automatic Dual Slope Laser. Fast and Easy Setup – Fully automatic self-leveling allows the operator to setup with just the push of one button. No level bubbles or screws to adjust! Large ±9% (±5 degrees) self-leveling range makes this possible! During work, the automatic self-leveling keeps the beam horizontal, even as the laser is exposed to knocks and vibration. The large LCD display shows all setting and the battery condition. Rugged design – The ML 13x is built to be strong and robust, with the rotor head sealed in a glass housing, making the laser 100% watertight and dust-proof. 600 RPM makes the ML 13x perfect for machine control applications as well as use with normal handheld detectors. The ML 13x is supplied in a transport case with batteries, fast charger and Hand Detector HS 10. Staff and Stand is also included.
For finishing concrete after screeding, these floats are the thing to use. By turning the handle you can tilt the float to suit whether it is going forward or backwards. The handle comes with up to 3 length extensions, each extension is 6 feet (1.83 metres).
This concrete breaker is run by electricity and breaks out up to 100mm thick These machines break out driveways, chimneys and other concrete areas.
This electric combihammer has maximum working comfort thanks to innovative, perfectly balanced design with ergonomic D-grip and extremely wide range of applications thanks to rapidly interchangeable chucks: TE-C Click chuck (SDS-plus), 3-jaw key chuck and keyless quick-release chuck. Use to hammer drill into concrete, masonry and natural stone (recommended diameter range: 14 to 24 mm); light chiseling work on concrete and masonry; socket cutting using percussion core bits up to 90 mm dia.; drilling with high torque in wood and metal
This large electric concrete breakers is suited to breaking thicker concrete. It is Ideal for breaking out driveway sections, concrete steps and pathways up to 300mm in depth. It comes with a tool cart for easy transport around the site and a pick, chisel or spade bits, at no extra cost.
You can't go past the standard concrete mixer. This is towable but it is advisable to travel at speeds of no more than 50 km/phr. It would be preferable to use a trailer. Great for those small concrete jobs around the house and workplace - just add concrete pre-mix, concrete, water and let it mix.
You can't go past the standard concrete mixer. This is towable but it is advisable to travel at speeds of no more than 50 km/phr. It would be preferable to use a trailer. Great for those small concrete jobs around the house and workplace - just add concrete pre-mix, concrete, water and let it mix.
This concrete cutter also ideal for heavier cutting of concrete and stone in alterations, renovations and new construction. It is perfect for cutting smaller holes and adjusting window and door openings, as well as for pipe, asphalt and metal cutting. It's also ideal for cutting of curbstones and pavers in landscaping. It is equipped with an X-Torq®engine, which reduces emissions up to 75 % and lowers fuel consumption by 20 % and has a new ergonomic rear handle with hand-friendly controls and is designed to rest well against the body. It comes with a trolley to get those perfectly straight cuts.
These angle grinders are fitted with diamond 9" cup discs that are useful to grind off things that are a bit stickier or not. They have a guard fitted that a vacuum cleaner can be fitted to for removing dust. Used for tidy up work on concrete edges or grinding corners off concrete.
Paddle Float ( or else known as Kelly Float) that is petrol powered and has adjustable blades. Use for that nice smooth finish on concrete pads. Also comes with a trailer designed specifically to lift the paddle float and swing on or off the pad - remove the need for that extra person at the end of the job
The ML 13x is a semi-automatic Dual Slope Laser. Fast and Easy Setup – Fully automatic self-leveling allows the operator to setup with just the push of one button. No level bubbles or screws to adjust! Large ±9% (±5 degrees) self-leveling range makes this possible! During work, the automatic self-leveling keeps the beam horizontal, even as the laser is exposed to knocks and vibration. The large LCD display shows all setting and the battery condition. Rugged design – The ML 13x is built to be strong and robust, with the rotor head sealed in a glass housing, making the laser 100% watertight and dust-proof. 600 RPM makes the ML 13x perfect for machine control applications as well as use with normal handheld detectors. The ML 13x is supplied in a transport case with batteries, fast charger and Hand Detector HS 10. Staff and Stand is also included.
For finishing concrete after screeding, these floats are the thing to use. By turning the handle you can tilt the float to suit whether it is going forward or backwards. The handle comes with up to 3 length extensions, each extension is 6 feet (1.83 metres).
A medium concrete breaker run by electricity. These machines break out driveways, chimneys and other concrete areas.
This electric combihammer has maximum working comfort thanks to innovative, perfectly balanced design with ergonomic D-grip and extremely wide range of applications thanks to rapidly interchangeable chucks: TE-C Click chuck (SDS-plus), 3-jaw key chuck and keyless quick-release chuck. Use to hammer drill into concrete, masonry and natural stone (recommended diameter range: 14 to 24 mm); light chiseling work on concrete and masonry; socket cutting using percussion core bits up to 90 mm dia.; drilling with high torque in wood and metal
This large electric concrete breakers is suited to breaking thicker concrete. It is Ideal for breaking out driveway sections, concrete steps and pathways. It comes with a tool cart for easy transport around the site and a pick, chisel or spade bits, at no extra cost.
You can't go past the standard concrete mixer. This is towable but it is advisable to travel at speeds of no more than 50 km/phr. It would be preferable to use a trailer. Great for those small concrete jobs around the house and workplace - just add concrete pre-mix, concrete, water and let it mix.
You can't go past the standard concrete mixer. This is towable but it is advisable to travel at speeds of no more than 50 km/phr. It would be preferable to use a trailer. Great for those small concrete jobs around the house and workplace - just add concrete pre-mix, concrete, water and let it mix.
This concrete cutter also ideal for heavier cutting of concrete and stone in alterations, renovations and new construction. It is perfect for cutting smaller holes and adjusting window and door openings, as well as for pipe, asphalt and metal cutting. It's also ideal for cutting of curbstones and pavers in landscaping. It is equipped with an X-Torq®engine, which reduces emissions up to 75 % and lowers fuel consumption by 20 % and has a new ergonomic rear handle with hand-friendly controls and is designed to rest well against the body. It comes with a trolley to get those perfectly straight cuts.
These angle grinders are fitted with diamond cup discs that are useful to grind off things that are a bit stickier or not. They have a guard fitted that a vacuum cleaner can be fitted to for removing dust.
Used for tidy up work on concrete edges or grinding corners off concrete.