Box Blade - 3 Point Linkage

Day: $120
Half Day: $90
24 hours: $150

This box blade is 7' (2100mm) in width with 6 ripper tines. It is attached to the tractor with the 3pt linkage. Use the top arm to tilt the box either forward or back to either use the rippers or use the blade to grade more or less. The material is trapped inside the box giving it better use of the material by not allowing it to flow outside. It has a double cutting bar on it so you can both push and pull the material with it. The 6 ripper tines are adjustable to a depth that may suit numerous jobs such as taking the top surface off an old drive or pre-rip the ground before using the rotary hoe. Use the box blade for levelling, ripping, back-filling, or grading areas such as lawns, drives, paddocks, out-door arenas etc; clearing feed lots and the like.
Additional photos of the 4105 JD Tractor with the box blade attached have been provided to illustrate what, combined, they look like. This box blade can be used with our tractor or used on your one. Tractor sized must be between 35-55hp.

Grade Blade (3pt linkage)

Day: $120
Half Day: $90
24 hours: $150

Grader Blade for the tractor. With over 85% of the total blade bearing down on the cutting edge gives it great 'bite-in' ability. It has levelling wheel options, a reversible cutting edge and the blade has full 3way adjustment and 260 degrees rotation. This implement is great for spreading, smoothing over and collecting soil and other such material. It can be hired with our tractor if required.

Grader Blade with 27HP Tractor John Deere (2520)

Day: $295
Half Day: $220
24 hours: $385

Grader Blade with the John Deere Tractor 2520. With over 85% of the total blade bearing down on the cutting edge gives it great 'bite-in' ability. It has levelling wheel options, a reversible cutting edge and the blade has full 3way adjustment and 260 degrees rotation. This implement is great for spreading, smoothing over and collecting soil and other such material.

Additional photos of the 2520 JD Tractor with the grader attached have been provided to illustrate what, combined, they look like. This pricing includes the tractor.

Box Blade with 40HP Tractor

Day: $358
Half Day: $280
24 hours: $460

This box blade is 7' (2100mm) in width with 6 ripper tines. It is attached to the tractor with the 3pt linkage. Use the top arm to tilt the box either forward or back to either use the rippers or use the blade to grade more or less. The material is trapped inside the box giving it better use of the material by not allowing it to flow outside. It has a double cutting bar on it so you can both push and pull the material with it. The 6 ripper tines are adjustable to a depth that may suit numerous jobs such as taking the top surface off an old drive or pre-rip the ground before using the rotary hoe. Use the box blade for levelling, ripping, back-filling, or grading areas such as lawns, drives, paddocks, out-door arenas etc; clearing feed lots and the like. Pricing includes the tractor.